Filter
Top Products
34
Replacing Gateway 400VTX Components
www.gateway.com
Replacing the optical drive kit
Tools you need to complete this task:
Screws removed during this task:
To replace the optical drive kit:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
4 Turn your notebook over so the top is facing up.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 3.0 mm
(keyboard)
1 chrome 2.0 × 3.0 mm
(optical drive)
1 black 2.5 × 4.0 mm
(optical drive)
2 chrome 1.7 × 3.5 mm
(optical drive kit bracket)