Filter
Top Products
50
Replacing Gateway 400VTX Components
www.gateway.com
Replacing the LCD panel assembly
Tools you need to complete this task:
Screws removed during this task:
To replace the LCD panel assembly:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 3.0 mm
(keyboard)
4 chrome 2.5 × 5.5 mm
(hinges)
1 chrome 2.5 × 3.0 mm
(grounding screw)
5 chrome 2.0 × 3.0 mm
(cooling assembly)