Filter
Top Products
CHAPTER 4: Upgrading Your Computer
38
Replacing the side panel
To replace the side panel:
1 Make sure that all of the internal cables are arranged
inside the computer so they will not be pinched when
you close the computer.
2 Slide the side panel toward the front of the computer
until the back of the side panel is flush with the back of
the computer.
3 Tighten the two thumbscrews on the back edge of the
side panel, then reconnect the cables and power cord.
Replacing the color panel
To replace the color panel on the front bezel:
1 Find the panel release lever inside the front bezel’s lower
vent opening, then slide the lever to the left.
Tip
If you have difficulty removing the color panel, it may be easier
to remove the front bezel first. (This procedure shows the bezel removed.)
To remove the front bezel, follow the instructions in “Removing the front
bezel” on page 35.
8512418.book Page 38 Friday, May 11, 2007 11:44 AM