Filter
Top Products
18 • Configuring and Using PMCS Wizards PMCS Interface Toolkit
5. Select the appropriate EPM 7700 device from the list and click OK.
6. Select a Trend Window using the trend window list available by clicking the
ellipsis to the right of the trend window text box.
7. When the wizard has completed its configuration, close the current window and
DO NOT save it – it is not a functional part of the wizard, and it cannot be used
to create graphics for additional devices. All of the functional wizard screens
were created and saved during the configuration process.
8. Stop and restart the project, then hit F5 to refresh the list of screens in the
project.
Repeat steps 1 – 8 to create additional EPM 7700 device screens as necessary for
your application.
Note: Refer to the Sample Application section when designing your project to
understand and take advantage of PMCS Advanced Wizard functions such as the
many-to-one relationships possible with Advanced Small Faceplate Wizards and
Large Faceplate/Tabular Wizards. The configuration techniques available may save
considerable development time and effort, especially with regard to the EPM 7700
device type.
The figure below shows the one of the eight Tabular screens resulting from the
correct configuration of the EPM 7700 wizard. You can verify that there are in fact
eight separate screens rather than multiple pages of a single screen by selecting
different tabs at the bottom of the tabular wizard. Observe the file name at the top of
the window - the file name will change to match the selected tab.