Filter
Top Products
Publication No. GEG-99126 Genicom Aug 2001
D-2 GENICOM LN45 and Intelliprint mL450 User Guide
About this Appendix
This appendix lists some of the most frequently-used commands of the Print Server command set. More
information about the command set, including additional options, can be found in the Ethernet Network
Interface Manual on the Electronic Library CD-ROM.
Please note the following before continuing:
• In this command set appendix the NIC is referred to as the Server.
• Commands are divided into Server (general), Port, and Protocol sections. Within each section, com-
mands are listed alphabetically.
• Commands may require privileged user status. Enter
Set Privileged, then enter the privileged pass-
word when prompted.
• When you enter a Define or Purge command, you must reboot the Server for the command to take
effect.
• When the abbreviated syntax “
{EN|DIS}” is shown, you must choose either Enabled or Disabled
to complete the command.
Each section lists additional information needed to use the command table in that section.