Filter
Top Products
Aug 2001 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide D-5
DEFINE SERVICE
“name” option
TCPPORT string Specifies a raw TCP listener socket for the
service. Enter a socket number (4000 to
4999) or the word none.
TELNETPORT string Specifies a TCP listener socket for the
service. Unlike TCPport, this option
performs Telnet IAC interpretation on the
data stream. Enter a socket number (4000
to 4999) or the word none.
INITIALIZE option DELAY num Schedules a reboot after
num minutes. Enter
a value from 0 to 120.
CANCEL Cancels an impending initialization.
FACTORY Reboots the server to its factory default
settings.
NOBOOT Forces the Server to stop in Boot
Configuration Mode rather than fully
rebooting.
RELOAD Forces the Server to download new
operational code and reprogram its
flash-ROM.
LOGOUT option <nothing> Logs out the current port (the port that
issued the command).
PORT num Logs out the specified port.
PURGE SERVICE
option
LOCAL Removes the definitions of all local services.
“service” Removes the definition of the specified
service.
SET PRIVILEGED Enters privileged mode, provided the user
enters the proper privileged password when
prompted.
{SHOW|MONITOR} QUEUE Displays the status of Server queues once
(Show) or continually every three seconds
(Monitor).
{SHOW|MONITOR} SERVER Displays Server information once (Show) or
continually every three seconds (Monitor).
{SHOW|MONITOR}
SERVICE option
<nothing> Displays characteristics about all configured
services once (Show) or continually every
three seconds (Monitor).
“service” Displays only characteristics related to the
named service.
ZERO COUNTERS
option
ALL Zeroes all port, node, and Server counters.
PORT num Zeroes port counters for the specified port.
Frequently-used Server Commands
Command Option(s) Description