Filter
Top Products
Error Message Resolution Guide
Message Reason Solution Reference Tech Note
r; t load the font.
is available to
Printer Not Ready\nPress R to
Print;
Can not print. Check cable, battery, communication
the printer.
---
Mobile Unit in\nDemonstration
inClient;
Running in demo mode. Purchase a license from Connect. ---
Connected to Host; Successful connection to the target Advisory message. ---
Telnet Mode not\nsupported on\nthis
e Unit;
This Mobile Unit must be used with
t Server.
Order a Connect Server. ---
Telnet Setup files\nnot found.
Reload\nfiles then switch;
Customer specific configuration
files are missing.
Load the configuration files into the
Mobile Unit from Twin Client Manager.
---
Switched Client to\nTelnet Direct Mode; Mobile Unit running in Telnet mode
direct to the target Host.
Advisory message. ---
Switched Client to\nServer Based
Mode;
Mobile Unit running through a
Connect server in Server mode
t port 1800.
Port 23 is only\nallowed in Telnet
Mode;
Can not set the port to 23 in Server
mode. Port 23 is the standard
rt.
Advisory message. ---
Not Enough Memory\nTo Run; Mobile Unit does not have the
capacity to run the program do to
restrictions.
Expand the Mobile Unit memory. ---
Press a key to continue.
Font Loading Erro Could no
Ensure that the font
load.
---
Retry\nC to Cancel settings and paper in
Mode\nfor Tw
Host.
Mobil a Connec
usually a
Advisory message. ---
Telnet po
memory
Press any key; Advisory message. ---
Supported Equipment Manual
•
January, 2006 4-7