![](http://pdfasset.owneriq.net/2/42/2421ae0d-bd6a-4962-9e27-2c695c4f69dc/2421ae0d-bd6a-4962-9e27-2c695c4f69dc-bg34.png)
Terminal Setup
Monitor.
7. Press a key on the RF terminal to open a session, and you should see trace data in the
RF Monitor window. When done, end the trace and the file will be named
tnxxx.yyy.log (where xxx.yyy is the last 2 octets of the RF terminal’s IP address) in
the directory in which RF Monitor was running.
6.
With the RF terminal sitting at the Press Any Key prompt, select Actions/Start
2-42 Supported Equipment Manual
•
January, 2006