Filter
Top Products
Terminal Setup
Sending Program Files to the 7400/9500 Terminal
1. Cold boot the inal.
2. On the terminal, click on Enter.
3. Double-click on the
My Computer icon
4. Double-click on the
IPSM icon.
5. Select the
Twin Client folder.
6. Choose
Delete the File menu.
7. Choose
Yes at the prompts.
8. Cold boot the terminal.
9. Click
Enter.
10. Go to
Start, gs, and Control Pa
11. Double-click on the
Communication icon.
12. Select the PC Connection tab.
13. Chose a baud rate of Direct 115200 when using the terminal with the cable, and
choose a baud rate of
Infrared 57600 when using the terminal in the cradle.
14. Go into
Tweak Activesync (an Hand Held Products utility) on the PC.
15. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you ar ng a cable with the t
term
.
from
Settin nel.
e usi erminal.
16. Click on Close Activesy click on Open A nc. nc, then ctivesy
Supported Equipment Manual
•
January, 2006 2-51