Filter
Top Products
Terminal Setup
19. Choose OK.
20. Click on OK.
21. Cold boot the terminal.
22. On the terminal, select the
Specify an IP Address button.
23. Enter the
IP A r , Subnet Ma and Default Gateway.
24. Click on OK.
25. Go to Start, Programs, Cisco, and Client Utility.
26. Select SSID and its Value.
27. Click on OK.
28. Go to Start, Pr g s, Cisco, an lient Util ty
29. Select World Mode, and change the Value to Disabled.
30. Click on OK.
31. Warm boot the terminal. To perform a warm boot, press and hold the CTRL and SFT
keys for about 10 seconds, then release.
dd ess sk,
o ram d C i .
2-50 Supported Equipment Manual
•
January, 2006