Filter
Top Products
Harmony Utility 40
Edit the configuration parameters as necessary and click Apply to save your changes.
To change the operating Channel, Send Rate, RTS/CTS, and Fragmentation settings,
click the button labeled Advanced Configuration to display these parameters.
The configuration parameters are described in Chapter 4 beginning on page 27; some
options may not be available in all countries (see “Overview of Country-Specific
Features” on page 11 for details).
Note that the Channel selection box is unavailable when the Network Mode is set to
Infrastructure. When Network Mode is set to Ad Hoc, you can configure one or more
Channels for the adapter to scan. If you select multiple Channels, the adapter will
scan each Channel looking for an Ad Hoc network to join that uses the same SSID as
the adapter.