Filter
Top Products
Harmony Utility 50
7. Click the Authentication tab.
8. Configure the 802.1x settings. Contact your network administrator or refer to
Windows XP’s on-line Help if you need assistance configuring these settings.
Note: Depending on the network’s EAP authentication type, your network adminis-
trator may need to provide you with a smart card or install a digital certificate
on your computer.
9. Click the Wireless Networks tab.
10. Access the Wireless Network Properties for your network.
• If your network is listed in Available networks, highlight it and click Configure.
• If your network is listed in Preferred networks, highlight it and click Properties.
• If your network is not listed, click Add and enter the network’s SSID.
11. Configure the network’s WEP settings.
Note: If your EAP type supports dynamic WEP keys, place a check mark next to the
Data encryption (WEP enabled) and The key is provided for me automati-
cally options.
12. Click OK twice to exit the network’s properties window.