Filter
Top Products
Troubleshooting 59
Windows 98/ME/2000/XP Troubleshooting
Adapter Inserted Before Running the Installation Program
If you inserted the Harmony 802.11a network adapter into a Windows computer before
running the Harmony Installation program, you can install the adapter using
Microsoft’s Add New Hardware Wizard (not available for Windows NT users).
Follow these steps:
Note: PCI Card users should begin at Step #1. CardBus Card users should begin at
Step #8.
1. Turn off the computer, unplug its power cord from the wall outlet, and remove the
computer cover.
2. Locate an unused PCI slot and refer to your PC’s manual for instructions on how
to remove the plate that covers the slot (if applicable).
3. Feed the card’s antennas through the PCI slot and out the back of the computer.
4. Align the PCI Card over the empty slot and firmly insert the card into the slot, as
illustrated below.
5. Secure the card’s metal bracket to the computer following the directions
provided in your PC’s manual and replace the computer cover.
6. Plug the computer’s power cord back into the wall outlet.