Filter
Top Products
iii: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add
button to install it now. If TCP/IP is installed, go to step 5.
iv: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing
the TCP/IP protocol. You may need your Windows CD to complete the installation.
v: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols
and then click the Properties button.
vi: Check each of the tabs and verify the following settings:
• IP Address: Select Obtain an IP address from a DHCP server.
• DNS: all fields are blank.
• WINS: all fields are blank.
• Routing: all fields are blank.
Figure 0.4
13