Filter
Top Products
Description
Enter the User Name provided by your ISP for the Telstra Big Pond connection
Enter the Password provided by your ISP for the Telstra Big Pond connection
Select if you want to assign the IP of Telstra Big Pond’s login
server manually.
Parameter
User Name
Password
User decide login server
server manually
Login Server The IP of the Login Server.
Click OK when you have finished the configuration above. You have now completed the configuration for the Telstra
ig Pond connection. You can start using the router now. If you wish to use some of the advanced features supported by
2, 3, 4.
he WAN policy for multi-homing can be setup here. You can set up policy for each WAN separately. The router will
alance the load between all active WAN ports according to the Send/Receive rate of the WAN ports. You can setup an
address for the router to detect if the WAN line is connected. If the router fails to ping the IP, it would recognize the
AN line as not connected, and will stop directing the Internet traffic to this WAN port. The traffic will be redirected to
e other active WAN port. The Intranet users will not become aware of this change and keep surfing the Internet
moothly. You also can setup a WAN port as a backup WAN port. A backup WAN port would not be activated when the
uter starts up. When the other active WAN port fails to connect to the Internet, the backup WAN port will be activated
nd take over all the traffic.
B
this router, see Chapters
2.2.7 WAN Policy
T
b
IP
W
th
s
ro
a
37