Hawking Technology H2BR4 Network Router User Manual


 
vii: Click OK to confirm the settings. Your PC will now obtain an IP address automatically from your router’s
DHCP server.
Note: Please make sure that the router’s DHCP server is the only DHCP server available on your LAN. Onc
you’ve configured your PC to obtain an IP address automatically, please proceed to S
e
tep 3.
) Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will
lt, the router’s DHCP server is enabled so that you
an obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A.
Note: Please ma CP server is the only DHCP server available on your LAN. If there is
another D P s you’ll need to switch one of the DHCP servers off. (To disable the
router’s DHCP server, see Chapter 2: LAN Port.)
4) Once your PC has obtained an IP address from your router, enter the router’s default IP address of “192.168.2.1”
into your PC’s web browser and press Enter.
3
automatically give your LAN clients IP addresses. By defau
c
ke sure that the router’s DH
HC erver on your network, then
Figure 0.5
5) The login screen below will appear. Enter the “User Name” and “Password” and then click <OK> to login.
Note: By default the user name is “admin” and the password is “1234”. For security reasons it is recommended
that you change the password as soon as possible (in General setup/system/password, see chapter 2)
Figure 0.6
14