Filter
Top Products
Parameters Default Description
LAN
IP address 192.168.2.1 This is the router’s LAN port (private) IP address (Your LAN clients’
default gateway IP address)
Subnet Mask 255.255.255.0 Specifies a Subnet Mask for your LAN segment
02.1d Spanning Disabled If the 802.1d Spanning Tree function is enabled, this router will use the
ree spanning tree protocol to prevent network loops from occurring among
the LAN ports.
HCP Server Enabled You can enable or disable the DHCP server. By enabling the DHCP
server, the router will automatically give your LAN clients an IP address.
If the DHCP is not enabled then you’ll have to manually set your LAN
clients’ IP addresses; make sure the LAN Client is in the same subnet as
the router if you want the router to be your LAN clients’ default gateway
ease Time When DHCP is enabled, it will temporarily give your LAN clients an IP
address. In the Lease Time setting you can specify the time period that
the DHCP lends an IP address to your LAN clients. The DHCP will
change your LAN client’s IP address when this time threshold period is
reached
IP Address Pool You can select a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients.
Note: By default the IP range is from: Start IP 192.168.2.100 to End IP
192.168.2.199. If you want your PC to have a static/fixed IP address then
you’ll have to choose an IP address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN
IP
8
T
D
L
Click Apply at the bottom of the screen to save the above configurations. You can now configure other advanced sections
or start using the router (with the advanced settings in place).
42