Filter
Top Products
Idle Time Out Note: The WAN "idle timeout" auto-disconnect function may not work due to abnormal
twork application software, computer viruses or hacker attacks from
the Internet. For example, some software sends network packets to the Internet in the
lso ay not work
function can work properly when you use this
function the first time, especially if your ISP charges you by time used. Due to various
ct
our
Click OK when you have finish
connection. You can start using is
router, see Chapters 2, 3, 4.
.2.6 Telstra Big Pond
elect Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the Internet. Your ISP should
i ormati n requi tralia.
ure 2.8
activities of some ne
background, even when you are not using the Internet. This function a m
with some ISPs. Please make sure this
uncontrollable issues, we cannot guarantee the WAN "idle timeout" auto-disconne
function will always work. In order to prevent an extra fee from being charged by y
ISP, please turn off the router when you are finished using the Internet.
ed the configuration above. You have now completed the configuration for the L2TP
the router now. If you wish to use some of the advanced features supported by th
2
S
provide all the nf o red in this section. Telstra Big Pond protocol is used by ISPs in Aus
Fig
36