Filter
Top Products
Parameter Description
Use m Enter the User Name provided by your ISP for the PPPoE cor Na e nnection
the PPPoE connection
e Name This is o our ISP require it. Otherwise, leave it
blank.
MTU This is optional. You can specify the maximum size of your transmission packet to the
Internet. Leave it as it is if you do not wish to set a maximum packet size.
select “Connect On Demand”, the router will auto-connect to the ISP when someone
wants to use the Internet and keep connected until the WAN idle timeout. The router will
close the WAN connection if the time period during which no one has been using the
Internet exceeds the “Idle Time”. If you select “Manual”, the router will connect to the
ection will not get disconnected due to the idle timeout. If the WAN line breaks
down and later links again, the router will not auto-connect to the ISP.
le Time You can specify an idle time threshold (in minutes) for the WAN port. This means if no
packets have been sent (no one is using the Internet) during this specified period, the
router will automatically disconnect the connection to the ISP/Internet.
Note: The WAN "idle timeout" auto-disconnect function may not work due to abnormal
activities of some network application software, computer viruses or hacker attacks from
the Internet. For example, some software sends network packets to the Internet in the
background, even when you are not using the Internet. This function also may not work
with some ISPs. Please make sure this function can work properly when you use this
function the first time, especially if your ISP charges you by time used. Due to various
uncontrollable issues, we cannot guarantee the WAN "idle timeout" auto-disconnect
function will always work. In order to prevent an extra fee from being charged by your
ISP, please turn off the router when you are finished using the Internet.
Password Enter the Password provided by your ISP for
Servic ptional. Enter the Service name should y
Connection Type If you select “Continuous”, the router will always be connected to the ISP/Internet. If the
WAN line breaks down and links again, the router will auto-reconnect to the ISP. If you
ISP only when you click “Connect” manually from the Web user interface. The WAN
conn
Id
Click OK when you have finished the configuration above. You have now completed the configuration for the PPPoE
ou wish to use some of the advanced features supported by this
router, see Chapters 2, 3, 4.
connection. You can start using the router now. If y
23