Filter
Top Products
Maintaining and
troubleshooting
Resolving printer problems 49
All lights are blinking
A non-recoverable error has occurred
• For example, the printhead carriage might be jammed. Try turning the printer off and then on again.
If the printer does not recover, unplug the printer from the power outlet and call HP Customer Support.
See Support and warranty.
Printer takes a long time to print
Check your system configuration
• Make sure that your computer meets the minimum system requirements for the printer.
See System requirements.
Check your port setting
• The port setting configuration in your system might not be set to ECP.
See the manual that came with your computer for information about how to change your port setting,
or contact your computer manufacturer.
Check the settings
• If the Type is set to Transparencies, or if the AutoSelect Type setting determines that you are printing
transparencies, or if you chose Best mode, then printing will take longer. If you want these settings to
be used, wait for the printer to finish. Otherwise, change the settings in the driver and print again.