Filter
Top Products
ENWW Guidelines for using media 97
Card stock and heavy media
You can print many types of card stock from the paper input tray, including index cards and
postcards. Some card stock performs better than others because its construction is better suited
for feeding through a laser printer.
For optimum printer performance, do not use paper heavier than 42 lb (157 g/m
2
). Paper that is
too heavy might cause misfeeds, stacking problems, paper jams, poor toner fusing, poor print
quality, or excessive mechanical wear.
Note You might be able to print on heavier paper if you do not fill the input tray to capacity and if you use
paper with a smoothness rating of 100-180 Sheffield.
Card stock construction
● Smoothness: 36-42 lb (135-157 g/m
2
) card stock should have a smoothness rating of
100-180 Sheffield. 16-36 lb (60-135 g/m
2
) card stock should have a smoothness rating of
100-250 Sheffield.
● Construction: Card stock should lie flat with less than 5 mm (0.2 in.) of curl.
● Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.
● Sizes: Only use card stock within the following size ranges:
• Minimum: 76 x 127 mm (3 x 5 in.)
• Maximum: 216 x 356 mm (8.5 x 14.0 in.)
Card stock guidelines
Set margins at least 2 mm (0.08 in.) away from the edges.