Filter
Top Products
ENWW Printed page is different than what appeared on screen 63
Printed page is different than what appeared on screen
Choose the item that best describes the problem:
● Garbled, incorrect, or incomplete text
● Missing graphics or text, or blank pages
● Page format is different than on another printer
● Graphics quality
Return to Finding the solution.
Printed page problems
Problem Solution
Garbled, incorrect, or incomplete text The USB or parallel cable might be loose or defective. Try the
following:
● Try printing a job that you know works.
● If possible, attach the USB or parallel cable and printer to another
computer, and try printing a job that you know works.
● Unplug the power cord, disconnect the USB or parallel cable at
both ends, reconnect the USB or parallel cable at both ends, and
plug the power cord back in.
CAUTION
Before you connect the cable to the printer, always unplug the printer.
Otherwise, the printer might be damaged.
The wrong printer driver might have been selected when the software
was installed. Make sure that the correct driver is selected in the
printer properties.
There might be a problem with your software application. Try printing
from another software application.
Missing graphics or text,
or blank pages
● Make sure that your file does not contain blank pages.
● The sealing tape might still be in the print cartridge. Remove the
print cartridge, and pull out the sealing tape. Reinstall the print
cartridge. See Changing the print cartridge for instructions.
● The graphic settings in the printer properties might not be correct
for the type of job that you are printing. Try a different graphic
setting in the printer properties. See Printer properties (driver)
for
more information.
Page format is different than on
another printer
If you used an older or different printer driver (printer software) to
create the document or the printer properties settings in the software
are different, the page format might change when you try to print
using your new printer driver or settings. To help eliminate this
problem, change the resolution, media size, font settings, and other
settings. See Printer properties (driver)
for more information.
Graphics quality The graphic settings might be unsuitable for your print job. Check the
graphic settings, such as resolution, in the printer properties and
adjust them as necessary. See Printer properties (driver)
for more
information.