Filter
Top Products
C4224-90962
Internal assemblies
103
Paper pick-up assembly removal
Figure 4-39Accessing the paper pick-up assembly area
Prior to this step: Remove the memory card (if applicable), scanner, pods, front door, front
cover, back cover, paper guide, top cover; and disconnect the laser/scanner.
1
Remove the screw attached to a bracket at the right end of the cover plate (callout 1).
2
Remove the two top screws attached to the right and left of the plate (callouts 2 and 3).
3
Remove the two screws located underneath the plate, securing it to the Paper Pick-up
Assembly (callouts 4 and 5).