Filter
Top Products
C4224-90962
Scanner control panel
31
Scanner control panel
Figure 2-2 Scanner control panel
The scanner Control Panel consists of two keys; a scan key and a copy key. These keys
have no effect on the printer other than contention for resources.
Scan
Pressing the scan key sends a message to the computer that opens the appropriate
software application to start the scan or starts a scan depending on how the computer
software is configured. If the scan is initiated with no paper in the ADF, an error message will
appear on the computer.
Quick copy
Pressing the copy button initiates a scan that is sent directly to the printer without using the
computer software. If there is no paper in the ADF, the scanner will still attempt to pick up a
sheet of paper. The Quick Copy function will work even if the unit is not attached to a
computer.
NOTE:
Scan Abort: Pressing both copy and scan keys within one half second of each other causes
the scanner to abort the current scan. If there is paper in the scanner, the scan engine will be
in a jam mode, and the paper will have to be removed manually. This decreases the chance
of documents being damaged by the scanner.
Scanner key functionality based on printer status
The following table contains scanner and printer modes and the result of pressing the scan
and/or copy keys. The scanner key has no effect on printer functionality other than some
print functionality will be held off due to contention for resources. The only print key press
that will affect a scan job, other than contention for resources, is a printer Control Panel
reset.