C4224-90962
Printer paper handling
37
Copy:
Letter, Legal, A4, Executive
Envelopes - Commercial 10, Monarch, C5, DL, B5, no custom
Paper Input Sensor(s)
None
Paper size change
As with the printer, the scanner has to receive paper size information on a job-by-job basis.
There is an unchangeable default, but the scan width can be adjusted by the job. The scan
length is determined by the media. Quick Copy paper sizes are set from the computer,
except in an NVRAM initialization or initial power up when paper size is set to a factory
default NVRAM value. This value is the same as the printer factory default paper size. If the
media is larger than the Quick Copy page size or the print page size, clipping might occur.