Filter
Top Products
150 Troubleshooting/Maintenance
C4224-90962
Figure 5-8 NVRAM PJL Factory Variables
To use these commands you need some method of sending PJL commands to the printer,
either with a software tool or by copying down a binary file containing the commands from
the host using a DOS box. For example from the DOS prompt:
copy /b filename lpt1
Here is an example file that uses one of the commands:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL ‘command’
@PJL RESET
Here is an of using the NVRAMINIT command:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL NVRAMINIT
@PJL RESET
084#/2,.8CTKCDNGQT%QOOCPF 2QUUKDNGUGVVKPIU
DEFAULT PAPER
"LETTER", "LEGAL, "A4",
"EXECUTIVE”, "COM10”,
"MONARCH”, "DL”, "C5”, "B5",
"CUSTOM"
DEFAULT LPARM:PCL
SYMSET
41 / # 0+51. +51.
+51.2%2%& 02%
2%2%6 -9 +0.
9 +0. 9 +0. &'5- 61 2
256':680+06.8075
/ 527 $. / #6 * 25/ # 6*
80/#6*2+(106.')#.
+51+51+51+51
+51+51+51+51
9 +0
DEFAULT OEM “ON”, “OFF”
DEFAULT PRINTPAGECOUNT 0-2147483647
DEFAULT SCANPAGECOUNT 0-2147483647
DEFAULT COPYPAGECOUNT 0-2147483647
CLEARNVRAM None - Command
NVRAMINIT None - Command