Filter
Top Products
hp psc 1310 series
chapter 12
64
troubleshooting
hardware installation troubleshooting
Use this section to solve any problems you might encounter while installing the
HP psc hardware.
problem possible cause and solution
I received a message to
attach the front panel
cover
The front panel cover is not attached, or it is attached incorrectly.
to attach the front panel cover
1 Remove the adhesive backing from the front panel cover.
2 Raise the lid of the HP psc. Place the front panel cover into the
recess and stick it into place.
Note: The HP psc will not work until you attach the front panel
cover.
My HP psc does not
turn on
Make sure each of the power cords is firmly connected, and wait a few
seconds for the HP psc to turn on. Also, if the HP psc is plugged in to
a power strip, make sure the strip is turned on.
step 1
step 2