Filter
Top Products
EN
Chapter 2 Printing Tasks
35
Printing Tasks
Printing on Envelopes
CAUTION
Before you load envelopes in Tray 1,
make sure they are undamaged and are
not stuck together. Never use envelopes
with clasps, snaps, windows, coated
linings, self-stick adhesives, or other
synthetic materials. See Appendix B for
media specifications.
1
Open Tray 1 by pulling the front
cover down.
2
Open the rear output bin by pulling
down on the top section of the bin.
Slide out the extender until it
extends fully.
Note
Using the rear output bin reduces
envelope curl.
3
Slide the width guides on Tray 1
outward slightly wider than the
media.
Continued on next page.
1
2
3