Filter
Top Products
74 Chapter 3 Printer Tips and Maintenance
EN
Note Make sure the toner cartridge is not empty when using the toner
cartridge cleaning. A near empty toner cartridge may also cause print
defects. This 10-minute process consumes toner and if used often can
reduce toner cartridge life.
Starting the Cleaning Process
1. Make sure the printer is turned on and in the ready state. Make
sure there is paper loaded in Tray 2.
2. Press and hold the Go and Job Cancel buttons until all lights
flash. This will take about 10 seconds. Release the buttons when
the lights flash.
3. For engine cleaning, press the Go button,
or
for cartridge cleaning, press the Job Cancel button.
4. Discard the blank page produced from the engine cleaning
process.
Note The cartridge cleaning process takes about 10 minutes. To stop the
toner cartridge cleaning process, turn the printer off.