Filter
Top Products
EN
Chapter 2 Printing Tasks
37
Printing on Labels
Only use labels recommended for laser printers, such as HP LaserJet
labels. See “Labels” on page 148 for specifications.
Print labels from Tray 1.
Load labels print-side up.
Use the rear output tray for labels.
Remove label sheet from the output bin as they are printed to
prevent them from sticking together.
Do not use labels that are separating from the backing sheet or
are wrinkled or damaged in any way.
Do not use label sheets with the backing sheet exposed or
partially used label sheets.
Do not feed a sheet of labels through the printer more than once.
The adhesive backing is designed for one pass through the
printer.
CAUTION
If a sheet of labels becomes jammed in the printer, remove the toner
cartridge and then see “Clearing Paper Jams” on page 85 to remove
the jammed labels.
Label Orientation
(Print-side up, top in)