HP (Hewlett-Packard) 2103R-CSDI Switch User Manual


 
Showing Module Configuration and Status
4-3
Each LED is described in Table 4-1.
Showing Module
Configuration
and Status
This section describes NMM commands that show module configuration
and status.
To show configuration and status for an Edge Router module, use the
following network management module commands:
SHOW MODULE
SHOW PORT
Table 4-1
Module LED Interpretations
LED Name
Color
State
Indicates
S
(Module Status)
Green
Blinking
The module is in boot mode
and is attempting
communication with the
carrier board.
On
Remains lit as long as there
is active communication
with the carrier board.
RTR
(Router Status)
Green
On
Router is functioning
properly.
Off or Blinking
Router is not functioning.
Replace the module.
E0 Activity
(Ethernet Activity)
Yellow
Blinking
Traffic is being passed.
S0
(Serial Port 0 Activity)
Yellow
Blinking
Traffic is being passed on
serial port 0.
S1
(Serial Port 1 Activity)
Yellow
Blinking
Traffic is being passed on
serial port 1.