Filter
Top Products
4-6
C
H
A
P
T
E
R
4:
M
O
N
I
T
O
R
I
N
G
E
D
G
E
R
O
U
T
E
R
M
O
D
U
L
E
O
P
E
R
A
T
I
O
N
Using the SHOW
PORT Command
The
SHOW PORT
command displays information about a single port or all
ports.
The syntax for the
SHOW PORT
command is:
SHOW PORT
slot.port
{verbose}
{no_verbose}
The following command displays verbose information for port 1 on an
Edge Router module installed in slot 1 of an ONcore hub:
ONcore> show port 1.1 verbose
Port Display for Module 6102M-SDEK:
Port Mode Status Network General Information
----- ------ ------- ------- ----------------
01.01 LOGICAL OKAY ETHERNET_4 2103R-CSDI
Port Connector: BACKPLANE
IP Address: 2.0.0.2
Subnetwork Mask: ff.00.00.00
Station Address: 00-00-0c-c0-3d-63
Dip Network Setting: ETHERNET_4
The following command displays verbose information for port 1 on an
Edge Router module installed in slot 4 of an ONline hub:
ONline> show port 4.1 verbose
Port Display for Module 5103R-CSD:
Port Mode Status Network General Information
----- -------- ------ -------- ----------------
04.01 LOGICAL OKAY ETHERNET_1
Port Connector: BACKPLANE
IP Address: 151.104.15.39
Station Address:
Capabilities: -NONE-
Native Port Number: 0