Filter
Top Products
150 B Control panel menus ENWW
PCL submenu
The following table lists the settings and possible values. In the Values column, the default value
for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
FORM LENGTH 5 to 128 (*60) Sets vertical spacing from 5 to 128 lines for default
paper size.
ORIENTATION *PORTRAIT
LANDSCAPE
Allows you to select default page orientation.
Note
It is best to set the page orientation in the program or
printer driver. (Program and printer-driver settings
override control panel settings.)
FONT SOURCE *INTERNAL
SOFT
SLOT 1, 2, or 3
INTERNAL: Internal fonts.
SOFT: Permanent soft fonts. This option is available only
if it is installed.
SLOT 1, 2, or 3: Fonts stored in one of the three DIMM
slots. This option is available only if it is installed.
FONT NUMBER *0 to 999 (*0) The printer assigns a number to each font and lists the
numbers on the PCL Font List. The font number
appears in the Font # column of the printout.
FONT PITCH 0.44 to 99.99 (*10.00) Selects the font pitch. This item might not appear,
depending on the font selected.
FONT POINT SIZE 4.00 to 999.75
(*12.00)
Selects the font point size. This appears only if a font
with a scalable point size is selected as the default font.
SYMBOL SET *PC-8
Several
Selects any one of several available symbol sets at the
printer control panel. A symbol set is a unique grouping
of all the characters in a font. PC-8 or PC-850 is
recommended for line-draw characters.
APPEND CR TO LF *NO
YES
Select YES to append a carriage return to each line feed
encountered in backward-compatible PCL jobs (pure
text, no job control). Some environments, such as
UNIX, indicate a new line using only the line feed
control code. This option allows you to append the
required carriage return to each line feed.