Filter
Top Products
70 Chapter 3 Managing and maintaining the printer ENWW
To check the supply levels using HP Web Jetadmin
In HP Web Jetadmin, select the printer device. The device status page shows supply-level
information.
Cartridge low and cartridge out conditions
The printer alerts you if the print cartridge is low on toner or out of toner.
When the cartridge is low on toner
When the cartridge is low on toner, the printer control panel shows the ORDER CARTRIDGE
message. The
ORDER CARTRIDGE message first appears when about 10 percent of the toner
remains in the print cartridge (at 5 percent coverage, about 600 pages remaining).
The default is for the printer to continue printing until the toner runs out, but you might prefer to
have the printer stop instead of continuing when the
ORDER CARTRIDGE message first appears —
for example, if you want print quality to remain consistently high during print jobs, or if you do not
want the cartridge to run out during a long print job. To configure the printer to stop, set
CARTRIDGE LOW=STOP (in the System Setup submenu of the Configure Device menu). (See
“CARTRIDGE LOW” on page 155.) Then, when
ORDER CARTRIDGE appears, the printer will stop
printing. You can resume printing by pressing (S
ELECT button) for each print job.
When the cartridge is out of toner or drum life
The REPLACE CARTRIDGE message appears in one of these situations:
When the print cartridge is out of toner. If CARTRIDGE OUT is set to CONTINUE (in the
System Setup submenu of the Configure Device menu), the printer continues printing
without interaction until the cartridge reaches the end of drum life. HP does not guarantee
print quality after the REPLACE CARTRIDGE message is first displayed. Replace the print
cartridge as soon as possible. (See “Ordering parts, accessories, and supplies” on
page 116.)
The REPLACE CARTRIDGE message remains until you replace the print cartridge. If
CARTRIDGE OUT is set to STOP, the printer stops printing until you replace the print cartridge or
resume printing by pressing (S
ELECT button) for each print job.
When the drum life of the print cartridge is out. You must replace the print cartridge to
continue printing. No override is possible, even if toner remains in the cartridge. (See
“Ordering parts, accessories, and supplies” on page 116.)
This situation occurs to protect
the printer.