Filter
Top Products
Installing the IP Console Switch
2-18 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installing.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:13 PM
6. Select Option 1—Network Configuration. The Network Configuration menu
is displayed.
Figure 2-17: Network Configuration menu
7. Select Option 1 to set the network speed. When possible, set the connection
manually without relying on the auto negotiate feature. After you enter your
selection, you return to the Network Configuration menu.
8. Select Option 2 to specify a static or BootP IP address. Use a static IP address
for ease of configuration. If you are using a BootP address, configure your BootP
server to provide an IP address to the console switch, omit step 9, and continue to
the next procedure.
9. Select Option 3 through 5 from the Terminal Applications menu to finish
configuring the console switch for an IP address, Netmask, and Default Gateway.
When this configuration is complete, enter 0 to return to the IPViewer
HyperTerminal menu.