Filter
Top Products
6-17
IPv6 Management Security Features
Secure Shell for IPv6
Displaying an SSH Configuration
To verify an SSH for IPv6 configuration and display all SSH sessions running
on the switch, enter the show ip ssh command. Information on all current SSH
sessions (IPv4 and IPv6) is displayed.
ProCurve(config)# show ip ssh
SSH enabled : Yes
TCP Port Number : 22
Timeout (sec) : 120
Secure Copy Enabled : Yes
IP Version : IPv4orIPv6
Ses Type | Source IP Port
--- ------ + ---------------------------- -----
1 console |
2 ssh | 192.168.31.114 1722
3 telnet |
4 inactive |
Displays the current SSH configuration and status.
The switch uses these five SSH settings internally
for transactions with clients.
Here SSH is enabled for IPv4 and IPv6 clients.
With SSH running, the switch supports one console
session and up to five other SSH and Telnet (IPv4
and IPv6) sessions.
Web browser sessions are also supported, but are
not displayed in show ip ssh output.
Source IPv6 IP addresses of SSH clients are
displayed in hexadecimal format.