HP (Hewlett-Packard) 2900 Switch User Manual


 
1-4
Getting Started
Sources for More Information
Sources for More Information
This guide covers features related to IPv6 operation in software release
K.13.01, and includes an IPv6 command index on page xi.
For information about switch operation and features not covered in this guide,
refer to the switch publications listed in this section.
Note For the latest version of all ProCurve switch documentation referred to below,
including Release Notes covering recently added features, visit the ProCurve
Networking web site at www.procurve.com, click on Technical support, and then
click on Product Manuals (all).
Software Release Notes—Release Notes are posted on the ProCurve
Networking web site and provide information on new software updates:
new features and how to configure and use them
software management, including downloading software to the switch
software fixes addressed in current and previous releases
Product Notes and Software Update Information—The printed Read Me
First shipped with your switch provides software update information,
product notes, and other information.
Installation and Getting Started Guide—Use the Installation and Get-
ting Started Guide shipped with your switch to prepare for and perform
the physical installation. This guide also steps you through connecting the
switch to your network and assigning IP addressing, as well as describing
the LED indications for correct operation and trouble analysis.
Management and Configuration Guide—Use this guide for information
on topics such as:
various interfaces available on the switch
memory and configuration operation
interface access
IP addressing
time protocols
port configuration, trunking, traffic control, and PoE operation
Redundant management
SNMP, LLDP, and other network management topics
file transfers, switch monitoring, troubleshooting, and MAC address
management