HP (Hewlett-Packard) 3080 Personal Computer User Manual


 
8. Remove the screw that secures the power supply to the base of the computer.
NOTE: HP Pro 3015 shown. System board appearance varies by model.
9. Slide the power supply about 1.25 cm (1/2-inch) toward the front of the chassis, rotate the power
supply toward the heatsink so it clears the lip at the top of the chassis, and then lift the power
supply out of the chassis.
To install the power supply, reverse the removal procedure.
124 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis