Filter
Top Products
Power Output 300 W 300 W
Rated Input Current (maximum)
1
8A @ 100 VAC 4A @ 200 VAC
1
This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European
Union. This supply requires the use of an input voltage range select switch.
Table D-4 Specifications – HP Pro 3010 Small Form Factor
Desktop Dimensions
Height
Width
Depth
3.98 in
13.35 in
15.24 in
101 mm
339 mm
387 mm
Approximate Weight 14.95 lb 6.78 kg
Temperature Range
Operating
Nonoperating
50° to 95°F
-22° to 140°F
10° to 35°C
-30° to 60°C
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
10-90%
5-95%
10-90%
5-95%
Maximum Altitude (unpressurized)
Operating
Nonoperating
10,000 ft
30,000 ft
3048 m
9144 m
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no
direct sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and
number of options installed.
Heat Dissipation
Maximum
Typical (idle)
1575 BTU/hr
307 BTU/hr
397 kg-cal/hr
77 kg-cal/hr
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
115V
90-132 VAC
100-127 VAC
50-60 Hz
230V
180-264 VAC
200-240 VAC
50-60 Hz
Power Output 300 W 300 W
Rated Input Current (maximum)
1
8A @ 100 VAC 4A @ 200 VAC
1
This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European
Union. This supply requires the use of an input voltage range select switch.
Table D-3 Specifications – HP Pro 3000/3080 Small Form Factor (continued)
Small Form Factor 181