Filter
Top Products
124 Printer Control Panel Messages
EN
INITIALIZING This message is displayed when the
printer is initially turned on.
No action required.
INSTALL
DRUM KIT
The drum kit is not installed or is
incorrectly installed.
Verify that the drum kit is
correctly installed.
INSTALL TRAY 2 Tray 2 is not installed or is not
completely closed, preventing
media from being printed from
Tray 3.
Verify that Tray 2 is completely
closed.
MEMORY FULL
STORED DATA LOST
The printer has no available
memory. The current job may not
print correctly. Some downloaded
fonts may have been deleted.
Try printing simplified pages. If
this does not resolve the
problem, add printer memory.
MEMORY SETTINGS
CHANGED
The I/O buffering settings were
changed by the printer because
there is not enough memory
available to use the previous
settings.
No action required. Adding
printer memory may prevent
this from occurring.
MEMORY SHORTAGE
JOB CLEARED
The available memory was not
enough to continue printing. The
remainder of the job was canceled.
Adding printer memory may
prevent this from occurring.
MEMORY SHORTAGE
PAGE SIMPLIFIED
The image was too large for
available printer memory. Therefore,
the printer compressed the image,
resulting in lost data.
Adding printer memory may
prevent this from occurring.
NO JOB TO CANCEL C
ANCEL
J
OB
was pressed but there
is no active job or buffered data to
cancel. The printer automatically
returns to the READY state.
No action required.
OFFLINE The printer is offline and there are
no error messages pending.
Press G
O
to return the printer
to the READY state.
Printer Control Panel Messages (continued)
Message Description Recommended Action