![](http://pdfasset.owneriq.net/5/6d/56d73e70-e0a1-4b53-b76e-53bcf17e5572/56d73e70-e0a1-4b53-b76e-53bcf17e5572-bg10b.png)
Removal and Installation
8-17
HP DesignJet 5000 Series Printers Service Manual
Extension Cover (60" Model only)
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Left Rear Cover - Refer
to Page 8-15.
2. Remove 4 T-15 screws (Type B) from
the Extension Cover.
3. Lift the Cover and remove from the
Printer.