![](http://pdfasset.owneriq.net/5/6d/56d73e70-e0a1-4b53-b76e-53bcf17e5572/56d73e70-e0a1-4b53-b76e-53bcf17e5572-bg150.png)
Removal and Installation
8-86
HP DesignJet 5000 Series Printers Service Manual
Ink Supply Station (ISS) PCA
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the LAN Card - Refer to
Page 8-74.
2. Remove the Left Rear Cover - Refer
to Page 8-15
3. Remove the Right Rear Cover - Refer
to Page 8-16.
4. Remove the Electronics Module
Cover - Refer to Page 8-77.
5. Disconnect ALL Cables from the ISS
PCA (see installation of ISS PCA for
connections).
6. Remove 5 T-10 screws (Type K) from
the ISS PCA.
7. Remove the ISS PCA.