![](http://pdfasset.owneriq.net/5/6d/56d73e70-e0a1-4b53-b76e-53bcf17e5572/56d73e70-e0a1-4b53-b76e-53bcf17e5572-bg140.png)
Removal and Installation
8-70
HP DesignJet 5000 Series Printers Service Manual
Drop Detector Assembly
Removal
WARNING Switch off the Printer and remove the Power Cord.
1. Remove the Right Rear Cover - Refer
to Page 8-16.
2. Remove the Right Hand Cover - Refer
to Page 8-10.
3. Remove the Service Station Assembly
- Refer to Page 8-67.
4. Disconnect the Drop Detector cable
from the Service Station Cable.
5. Release the cable from the Service
Station.
Press clip to disconnect