![](http://pdfasset.owneriq.net/5/6d/56d73e70-e0a1-4b53-b76e-53bcf17e5572/56d73e70-e0a1-4b53-b76e-53bcf17e5572-bg13d.png)
Removal and Installation
8-67
HP DesignJet 5000 Series Printers Service Manual
Service Station Assembly
Removal
WARNING Switch off the Printer and remove the Power Cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Right Rear Cover - Refer
to Page 8-16.
2. Remove the Right Hand Cover - Refer
to Page 8-10.
3. Remove the Printhead Cleaners.
4. Manually slide the Carriage out of
the Service Station.