Filter
Top Products
11
5 Configuring the Adapter and
Installing Drivers
Novell NetWare 5.0 Only
Use the NetWare Install program to install the HP NetServer
10/100 adapter driver in Novell NetWare 5.0. For Novell
NetWare 4.1x, see the Novell NetWare 4.1x or 4.2 Only section
following this section. For Novell NetWare 3.11, 3.12 and 3.2,
see the ReadMe files. The following procedure is a condensed
description of the installation process:
1. From the NetWare console, type
NWCONFIG
and press
Enter.
2. From the Configuration Options screen, choose Driver
Options and press Enter.
3. Choose Configure network drivers and press Enter. If
any drivers are already loaded, a list of them appears.
4. Choose Select an additional driver and press Enter. A list
of drivers appears.
5. Insert the HP NetServer 10/100TX PCI LAN Adapter
Drivers CD into the CD-ROM drive and press the Insert
key to install an unlisted driver.
6. To specify the correct path to your media (if necessary),
press F3. Press Enter to search the floppy or CD-ROM
drive. To install from the CD, type the CD Volume Name:
\NetWare Server Name. For example,
HPTX_PCI_A+:\NWSERVER.
7. Select the appropriate HP PCI LAN Adapter and press
Enter.
8. Respond to the Copy and Save prompts.
9. Use the arrow keys to select additional protocol types, F3
to manually set IPX Frame types, or choose the defaults.
10. Enter the slot number. (You can find the slot number by
switching to the Console and manually loading the driver.
A list of available slot numbers is displayed. Then abort