Filter
Top Products
Chapter 5 Configuring the Adapter and Installing Drivers
13
list of drivers appears.
5. Insert the HP NetServer 10/100TX PCI LAN Adapter
Drivers CD into the CD-ROM drive and choose Install an
unlisted driver by clicking Insert.
6. If necessary, specify the correct path to your media by
pressing F3. Press Enter to search the floppy or CD-ROM
drive.
7. The driver name is displayed: HP NetServer 10/100
adapter. Press Enter to select it.
8. The next screens ask for frame and protocol types. Use the
arrow keys to select specific items or choose the defaults.
Select Save parameters and load driver to continue.
9. For each additional adapter you want to install, press Esc,
and then repeat steps 7-8.
10. To complete the driver installation process, press the Esc
key until you arrive back at the Installation Options screen.
11. To return to the console prompt, choose Exit.
NOTE If the adapter cannot transmit or receive
following the installation, you may need to
modify the frame type in the
AUTOEXEC.NCF
file.
Windows 2000
Install Network Drivers from Disk
After you put the HP NetServer 10/100 adapter in the
computer, connect the network cable, plug in the power cord
and start the computer. Windows automatically installs a
driver for the adapter from its own library of drivers. However,
you should still install the driver that is included on the HP
NetServer 10/100TX PCI LAN Adapter Drivers CD to ensure
you have the complete set of features described in this guide.
You can install this driver manually using the following
instructions:
1. Insert the HP NetServer 10/100TX PCI LAN Adapter
Drivers CD in the CD-ROM drive. (If the HP Product