Filter
Top Products
Removal and replacement procedures 46
To remove the bezel blank:
1. Turn off the server and all the peripherals connected to it.
2. Unplug all external cables and AC power cords. If necessary, label each one to expedite
reassembly.
3. Remove the unit from the rack and place on a flat surface.
4. Remove the top cover.
5. Pull the bezel blank out of the carrier.
CAUTION: Do not discard the bezel blank. If the optical disk drive is removed in the future, you
must reinstall the bezel blank to maintain proper system function.
Figure 10 Removing the Bezel Blank