Filter
Top Products
Removal and replacement procedures 61
Figure 35 Removing the Backplane
To reinstall the backplane:
1. Orient the backplane so that the notches on the backplane align with the hook on the drive cage
and then press the backplane down until it clicks into place.
2. Secure the backplane with three screws.
Figure 36 Reinstalling the Backplane
3. Install all cables.
System board configuration
Processor
HP ProLiant DL160 G6 Server supports quad core processors. If a single processor is installed, then
use socket 1. When two processors are used, the server supports boot functions through the
processor installed in socket 1. However, if processor 1 fails, the system cannot boot up, and if