Filter
Top Products
Removal and replacement procedures 60
Figure 33 Removing the Hot-plug Hard Drive
2. Remove the top cover.
3. Remove all cables connected to the backplane.
4. Remove the hard drive cage.
a. Loosen all screws that secure the hard drive cage to the chassis.
b. Slide the hard drive cage out and then lift it up. Remove the hard drive cage from the chassis.
Figure 34 Removing the Hard Drive Cage
5. Remove the backplane.
a. Remove all cables—including optical disk drive cables.
b. Remove the three screws that secure the backplane to the hard drive cage.
c. Pull the backplane up and out to release it from the hard drive cage.