Filter
Top Products
Removal and replacement procedures 94
Figure 91 Non-hot-plug Power Supply Unit
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capability of generating hazardous energy levels.
• DO not open the power supply unit. There are no serviceable parts inside it.
To remove the non-hot-plug power supply:
1. Loosen the two screws that secure the power supply, which are located beneath the chassis.
Figure 92 Loosening the Two Screws beneath the Chassis
2. Loosen the screws that secure the power supply to the chassis.
3. Pull and lift the power supply out of the chassis.